If "br23uboot1.00" refers to a specific bootloader version used in an embedded system, a network device, or another specialized context, it might have unique features or requirements. For more detailed information, it would be helpful to know:
If your controller is stuck in BR23UBOOT1.00 mode, try these sequential troubleshooting steps: Why is my pc recognizing my controller as a storage device? br23uboot1.00
Use a small pin to press the reset hole on the back of the controller for 10–15 seconds. If "br23uboot1
SPL → DDR init → load U-Boot → U-Boot env → bootcmd → try: mmc 0:1 /boot/uImage → fallback: tftp → fallback: recovery mode SPL → DDR init → load U-Boot →
: The Vendor ID (VID) associated with this mode is 0x4C4A , which belongs to Jieli Technology .
When a device shows up with this name in your file explorer, Windows is treating it as a mass storage device