Digi Sm5300b Manual Work ✦ Verified

: Push the green button/lever to the left to open the front door. Insert Roll : Place the label roll over the green bezel. Thread & Close

, and type a unique number. If it doesn't exist, the system will prompt you to create it. Edit Fields : Use the touchscreen to fill in the Product Name Unit Price (per kg or piece), and (usually matching the PLU for POS compatibility). : Enter the Best-before digi sm5300b manual work

| Problem | Likely Cause | Manual Fix | |--------|--------------|-------------| | Current reading shows negative when charging | Shunt sense wires reversed | Swap S+ and S- wires physically | | SOC jumps from 80% to 100% instantly | Charged voltage (P-04) set too low | Increase by 0.2V and repeat full charge | | SOC never reaches 100% | Tail current (P-05) too low | Increase to 5% or 8% for old batteries | | Display dim or blank | Aux power missing or low | Measure AUX input – must be 12-24V DC | | Erratic current readings | Loose shunt terminal bolts | Power off and torque bolts to spec (10 Nm) | : Push the green button/lever to the left

: Manually type ingredients or select "Special Messages" like "Keep Frozen" from a pre-defined list. Linerless Label Loading The SM-5300B often uses linerless labels with an auto-cutter to reduce waste. DIGI (TERAOKA) Open Cassette If it doesn't exist, the system will prompt you to create it

: Turn on the scale using the main power button and wait for the display to stabilize. Before weighing, place any empty containers or trays on the platform and press the Tare button to subtract their weight. Calling Up Products (PLUs) :